•

Precision sensor works to 25,000 feet MSL.

•

Audibly reports peak altitude after flight.

•

Stores over 5 minutes of flight data at 20 samples per second for later download to PC or Mac.

•

In-flight telemetry output for real-time data via your RF link.

•

All data is stored in nonvolatile memory and is preserved even if power is lost.

•

Deploys drogue and main chutes with audible igniter continuity check.

•

Main chute deployment altitude is adjustable from 300' to 1,700' in 200' steps.

•

Mach delay is adjustable from 0 to 14 seconds for high performance flights.

•

Robust power supply is not affected by up to two seconds loss of power in flight.

•

Will fire 10 parallel-redundant ematches even after 24 hours operation on standard 9V battery.

•

High accuracy A/D and precise factory calibration yeilds +/- 0.5% typical accuracy.

•

FLASH program memory for future firmware updates (free of charge to original purchaser).

•

Rugged SMD construction, stringent QC testing, and internal self-diagnostics assure reliability.

•

Measures just 3.0" L * 0.9"W * 0.7"H, fits in 24mm tube, weighs 0.7 oz.

•

Backed by a full three year warranty.

•

Normally powered by a standard 9V battery, use our BH24 or BK24 for 24mm installations.

•

Programmable low battery alarm for different battery types (default 8.4 volt setting for 9V alkaline.

•

Test fire either ematch channel from the computer.

•

Enable/disable optional one second apogee delay for dual-altimeter installations.

•

Enable/disable in-flight telemetry data output.